CLI   SF - Series   Metal-Polymer Plain Bearing 

It is wall wrapped bushings made of triple layer composites material which consists of a steel backing, a sintered porous bronze particles interlayer and calendared with PTFE and pb mixture as surface layer. it is of low friction coefficient, anti-wear, anti-corrosion and can be used without oil, or only a trace of oil is needed. Moreover, it is of low cost, low vibration and low noise...

CLI JF - Series      Bimetal Bearing & Bimetal Bushing

Bimetal cylindrical bushes, half bearing, thrust washer are sintered and rolled for many times is a bushing based on high quality, low-carbon steel as its backing and sintered with lead, tin and bronze alloy or rolled with aluminium tin alloy as its surface. The products are mainly applied in connecting rod of automobile engine, rocker, gear-box, automobile knuckle arm, steel plate spring...

CLI  FU-Series  Sintered Metal Powder Bush/ Parts (Oil-impregnated/Soaked)

It is made of bronze powder,iron powder, or iron-bronze mixed powder, mold pressed under high pressure and then sintered under high temperature, and oil is soaked into the homogeneously spreaded tiny pores of the metal under vacuum. It's used in domestio electric appliances, electric tools, textiles machinery...

CLI   FB - Series   Wrapped Bronze Bearing

Thin wall thickness is the most important peculiarity of Wrapped Bronze Bearings. They are light and compact, The inner-layer of the bush being a kind of high density copper alloy of special compositions, there is no hole and pit and provides higher load capacity and fatigue strength, in compare with traditional casting bronze bushes. It is manufactured by advanced technology...

CLI  JDB - Series  Solid Lubricant Embedded Bushing

It is a new type made from strong brass and homogeneously embedded with solid lubricant in its body. It breaks through the limit of general bearing whose lubrication depends on oil film. So it is suitable for high temperature, heavy duty, anti-corrosion, or where oil is hard to be introduced. It performance doubles both on hardness and wear-friction. It is now widely applied in successive...

CLI    FZ - Series     Ball Retainer Bearing 

This is copper or aluminum or plastice bastics based material, on which the rollers are aranged oderly in certain angle and intervals. Moreover, the retaining technique is improved that dropping of the rollers can be thoroughly prevented. The friction is low and can move freely both in redial and in axial directions, and the bearing is in high precision. This is a young generation of the roller...

Casting Copper/Copper Alloy Bushing

It is based on the copper alloy. This kind of bushings are widely used in machine-tool, agricultural machinery, crane electromotor, spring pin, steering shaft and transmission, etc. Machined Cast bronze bearings offer technically and economically favorable bearings solutions. High loading capability, low weight, good corrosion resistance. CLI can offere different type bronze alloys according to the life time, service etc. The tolerance is much tighter than wrapped...